2024 Virgin&Recycled HDPE Resin (film, injection, blow molding) with Good Price

• Customization: Available
• Material: High Density Polyethylene/HDPE
• Usage: General Plastics, Specialty Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Film Pressure
• Color: White
• Payment: T/T L/C
• Delivery: Within 15 Days After Received Deposit
• Transport Package: 25kg/Bag
• Specification: SGS
• Origin: China
• HS Code: 3901200090
• Production Capacity: 800tons/Month

Product Description

High density polyethylene (HDPE) is a white powder or granular product.Non-toxic, tasteless, crystallinity of 80% ~ 90%, softening point of 125 ~ 135ºC, use temperature up to 100ºC;The hardness, tensile strength and creep properties are better than those of LDPE.Good wear resistance, electrical insulation, toughness and cold resistance;Good chemical stability, at room temperature, insoluble in any organic solvent, acid, alkali and various salts corrosion;The membrane has low permeability to water vapor and air and low water absorption.Poor aging resistance, environmental stress cracking resistance is not as good as low density polyethylene, especially thermal oxidation will make its performance decline, so the resin must be added to the antioxidant and ultraviolet absorbent to improve the lack of this aspect.High density polyethylene film has low thermal deformation temperature under stress, so attention should be paid to its application.

Performance		Test Method	Test data	Data unit
Melt flow rate			9.0-13.0	g/10min
Density			0.948-0.951	g/cm3
Elongation			≥600	%
tensile yield strength			≥23	F50hr
Powder ash			≤0.04	%
cleanliness	foreign particle		0-20	Per/kg
	color chip		0-5	Per/kg