Polystyrene/Plastic Resin GPPS for Injection Molding

• Customization: Available
• Material: General Purpose Polystyrene/GPPS
• Usage: General Plastics
• Model NO.: GPPS 500
• Plastic Forming Method: Film Pressure
• Color: White
• Grade/Processing Method: Injection Molding
• Transport Package: 25kg/Bag
• Specification: COA
• Trademark: self produce
• Origin: China
• HS Code: 3901200090
• Production Capacity: 100 Tons/Month

Product Description

General Purpose Polystyrene (GPPS)

 

Virgin/recycled GPPS resin


It's for Injection molding.
 
Description:

GPPS is a colorless, odorless, tasteless and shiny, transparent particles. Light, cheap, low water absorption, good color, dimensional stability, good electrical properties, products, transparent, easy processing.

GPPS is low water absorption, in a wet environment can still maintain its mechanical properties and dimensional stability. Excellent electrical properties, volume resistivity and surface resistivity are high, and independent of temperature, humidity changes, are not subject to corona discharges. Radiation resistance is also very good.

GPPS is solubled in aromatic hydrocarbons, chlorinated hydrocarbons, aliphatic ketones and esters, but only swell in acetone. Resistant to the action of certain mineral oils, acids, alkalis, salts, lower alcohols and their aqueous solutions. Low water absorption, in wet conditions can still maintain its mechanical properties and dimensional stability. Excellent electrical properties, volume resistivity and surface resistivity are high, and not affected by temperature and humidity changes, and is not affected by corona discharge. Radiation resistance is also very good. 

Application:

Polystyrene fluidity, good processing performance, easy to color, good dimensional stability. Available injection molding, extrusion, blow molding, foam molding, thermoforming, bonding, coating, welding, machining, printing or the like into various parts. Especially suitable for injection molding, the material generally may not be used directly without drying when injection molding.
Used fot pharmaceutical packaging, Cosmetic packaging, Lighting fixture, Insulation, Electric packaging, etc.

 

Performance	Test method	Test data	Data unit
Specific gravity	ISO 1183/1987	1.04
Melt flow rate, (200 °C /5.0kg)	ISO 1133/1997	5.0	g/10min
Vicat softening point, (B50/Oil)	ISO 306/1994	99	°C
Heat deflection temperature, (1.8MPa)	ISO 75-2/1993	89	°C
Residual monomer	General standard method	<150	ppm(w)
Specification	Injection molding,Medical