| CAS No.: | 9002-88-4 |
|---|---|
| EINECS: | 200-815-3 |
| Material: | Low Density Polyethylene/LDPE |
| Usage: | General Plastics |
| Plastic Properties After Heated: | Thermoplastic Plastics |
| Plastic Forming Method: | Film Pressure |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
LDPE 100AC is for film and blowing moulding applications.
Application
Used for agricultural film, shrink film, hyaline membrane, shopping bags, packing bags.
Total
Material's state · Current valid
Performance characteristics · Eligibility of food contact
Processing method · Film and blowing molding
| Property item | Test data | Data unit |
| Density | 0.9205~0.9245 | g/cm3 |
| MFR | 1.7~2.3 | g/10min |
| Turbidity | ≤8 | °C |
| Film thickness | 30 | μm |
| Elongation at break | ≥500 | % |
| Elongation at break(MD) | ≥200 | % |
| Elongation at break(TD) | ≥450 | % |
| Tensile strength at break | ≥9 | MPa |
| Tensile strength at break (MD) | ≥18 | MPa |
| Tensile strength at break (TD) | ≥17 | MPa |
| Tearing strength(MD) | ≥4.0 | CN/μm |
| Tearing strength(TD) | ≥3.0 | CN/μm |
| Impact strength | ≥2.0 | CN/μm |
| Shore hardness | ≥44 | |
| Vicat softening point | ≥90 | °C |
| Melting point | 106~111 | °C |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}