| Customization: | Available |
|---|---|
| Material: | Low Density Polyethylene/LDPE |
| Usage: | General Plastics |
|
Still deciding? Get samples of US$ 35/Bag
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Specification: | injection molding\ Used for making agricultural film shrink film , hyaline membrane ,Pastry bags,packaging bag,shopping bag |
||||
| performance | Test conditions [state] | test method | test data | data unit | |
| basic performance |
density | 0.9205~0.9245 | g/cm3 | ||
| melt flow rate | 1.7~2.3 | g/10min | |||
| Mechanical properties | elongation at break |
≥500 | % | ||
| MD Tensile strength | ≥18 | MPa | |||
| TD Tensile strength | ≥17 | MPa | |||
| MD elongation at break | ≥200 | % | |||
| Tensile strength | ≥9 | MPa | |||
| Shore hardness | ≥44 | ||||
| TD elongation at break | ≥450 | % | |||
| MD tear strength | ≥4.0 | CN/μm | |||
| impact strength | ≥2.0 | CN/μm | |||
| TD tear strength | ≥3.0 | ||||
| thermal properties |
vicat softening point | ≥90 | °C |
||
| melting point | 106~111 | °C |
|||
){kind=link}