|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| CAS No.: | 9002-88-4 |
| Formula: | -[-CH2-CH2-]N |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Pictures
HDPE cable material Property |
Unit |
Typical Value |
Mass density |
g/cm³ |
0.941-0.959 |
Melt flow Rate(190 Centigrade /2.16kg) |
g/10min |
≤1.0 |
Tensile yield strength |
MPa |
≥19.0 |
Flexural modulus |
Mpa |
≥965 |
Elongation@ break |
% |
≥400 |
Impact Embrittlement temperature |
Centigrade |
MAX -118 |
Dielectric Constant |
100KHZ |
2.32 |
1MHZ |
2.31 |
|
Loss Tangent |
100KHZ |
MAX 0.0001 |
1MHZ |
MAX 0.0001 |
|
Volume resistivity |
OHM-CM |
MIN 1x10 15 |
| Item | Test method | Test data | Data unit |
| MFR(190ºC,2.16KG) | ASTM D1238 | 0.3 | g/10min |
| Density | ASTM D792 | 0.956 | g/cm³ |
| Tensile yield strength | ASTM D638 | 25 | Mpa |
| Tensile breaking strength | ASTM D638 | 38 | Mpa |
| flexural modulus (2% secant) |
ASTM D790 | 860 | Mpa |
| Elongation at break | ASTM D638 | 950 | % |
| Environmental stress cracking resistance (50°C, 100% Igepal, F50) |
ASTM D1693 | >200 | hr |
| Vicat softening point | ASTM D1525 | 128 | ºC |
| Notched impact strength of cantilevered beams(23ºC) | ASTM D256 | 130 | J/m |
| Shore hardness(D) | ASTM D2240 | 66 |
){kind=link}