Key Specifications/ Special Features:
Low-density polyethylene (LDPE) is a synthetic resin using a high pressure process via free radical polymerization of ethylene and is therefore also called "high-pressure polyethylene". Since its molecular chain has many long and short branches, LDPE is less crystalline than high-density polyethylene (HDPE) and its density is lower. It features light, flexible, good freezing resistance and impact resistance. LDPE is chemically stable. It has good resistance to acids (except strongly oxidizing acids), alkali, salt, excellent electrical insulation properties. Its vapor penetration rate is low. LDPE has high fluidity and good processability. It is suitable for being used in all types of thermoplastic processing processes, such as injection molding, extrusion molding, blow molding, rotomolding, coating, foaming, thermoforming, hot-jet welding and thermal welding
LDPE products use grade :
1). Film Grade (general-purpose film, highly transparent film, heavy-duty packaging film, shrinkable film),
2). Injection Molding Grade
3). Coating Grade
4). Artificial Flower Grade
5). Wire & Cable Grade
6). Ethylene Vinyl Acetate(EVA)
Applications:
1. LDPE is principally used for making films. It is widely used in the production of
- agricultural film (mulching film and shed film),
- packaging film (for use in packing candies, vegetables and frozen food),
- blown film for packaging liquid (for use in packaging milk, soy sauce, juice, bean curds and soy milk),
- heavy-duty packaging bags,
- shrinkage packaging film,
- elastic film,
- lining film,
- buildinguse film,
- general-purpose industrial packaging film and food bags.
2. LDPE is also widely used in the production of wire & cable insulation sheath. Cross-linked LDPE is the main material used in the insulation layer of high-voltage cables.
3. LDPE is also used in the production of injection-molded products (such as artificial flowers, medical instruments, medicine and food packaging material) and extrusion-molded tubes, plates, wire & cable coatings and profiled plastic products.
4. LDPE is also used for making blow-molded hollow products such as containers for holding food, medicine, cosmetics and chemical products, and tanks.
| Project |
Test method |
Test data |
Data unit |
| Basic properties |
Density |
ASTM D1505 |
0.921 |
g/cm³ |
| |
Melt flow rate |
ASTM D1238 |
0.25 |
g/10min |
| Mechanical properties |
Drop-hammer impact |
ASTM D1709 |
430 |
g |
| |
Tensile yield strength(TD) |
ISO 527-3 |
7.6 |
Mpa |
| |
Tensile yield strength(MD) |
ISO 527-3 |
9.2 |
Mpa |
| |
Tensile strength at break(TD) |
ISO 527-3 |
20.5 |
Mpa |
| |
Tensile strength at break(MD) |
ISO 527-3 |
21 |
Mpa |
| |
Tensile modulus(TD) |
ISO 527-3 |
128 |
Mpa |
| |
Tensile modulus(MD) |
ISO 527-3 |
128 |
Mpa |
| |
Elmandorf tear strength(MD) |
ASTM D1922 |
270 |
g |
| |
Elmandorf tear strength(TD) |
ASTM D1922 |
480 |
g |
Thermal
properties |
Melt temperature |
|
216 |
ºC |
| |
Vica softening point |
ASTM D1525 |
96 |
ºC |
){kind=link}