Diamond Member Since 2013 
Audited Supplier
| Reference FOB Price: | US $790.00-840.00 / Ton |
|---|---|
| Min. Order: | 20 Tons |
| CAS No.: | 9002-88-4 |
|---|---|
| Formula: | (C2h4)N |
| EINECS: | 618-339-3 |
| Material: | High Density Polyethylene/HDPE |
| Usage: | General Plastics |
| Plastic Properties After Heated: | Thermoplastic Plastics |
HDPE is a thermoplastic resin with high crystallinity and non-crystallinity. The appearance of HDPE in its
original state is milky white, and it is semitransparent to a certain extent in its meager section. PE has excellent resistance to most domestic and industrial chemicals. Certain kinds of chemicals can cause chemical corrosion, such as corrosive oxidants(concentrated nitric acid), aromatic hydrocarbons (xylene) and halogenated hydrocarbons (carbon tetrachloride). The polymer does not absorb moisture and has good water vapor resistance, so it can be used for packaging. HDPE has good electrical properties, especially high dielectric strength, which makes it very suitable for wires and cables. Medium to high molecular weight grade has good impact resistance, even at normal temperature and low temperature of -40F.
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
| Item | Test method | Test data | Data unit |
| ESCR(100%,lgepal 50ºC) | ASTM D1693 | 55 | hr |
| ESCR(10%,lgepal 50ºC) | ASTM D1693 | 20 | hr |
| MFR (190ºC/2.16kg) | ASTM D1238 | 0.34 | g/10min |
| MFR (190ºC/21.6kg) | ASTM D1238 | 28 | g/10min |
| Density | ASTM D792 | 0.956 | g/cm³ |
| IZOD | ASTM D256 | 145 | J/m |
| Tensile breaking strength | ASTM D638 | 31 | Mpa |
| Flexural modulus | ASTM D790 | 1060 | Mpa |
| Tensile yield strength | ASTM D638 | 28 | Mpa |
| Distortion temperature | ASTM D648 | 75 | ºC |
| Hardness | ASTM D2240 | 63 | / |
| Vicat | ASTM D1525 | 129 | ºC |