| Material: | Low Density Polyethylene/LDPE |
|---|---|
| Usage: | General Plastics |
| Plastic Properties After Heated: | Thermoplastic Plastics |
| Plastic Forming Method: | Film Pressure |
| Color: | White |
| Processing Method: | Injection Molding |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Low Denstiry Polyethylene(LDPE)
| Project | Test data | Data unit | |
| Basic properties | Density | 0.9205~0.9245 | g/cm3 |
| Melt flow rate | 1.7-2.3 | g/10min | |
| Mechanical properties | Elongation at break | ≥200 | % |
| Tensile strength at break | ≥17 | Mpa | |
| Tensile strength yield | ≥3.0 | ||
| Shore hardness | ≥44 | ||
| Thermal properties |
Vicat softening point | ≥90 | ºC |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}