Virgin/Recycled Plastic Materials LDPE Granules/LDPE Resin/LDPE

• Material: Low Density Polyethylene/LDPE
• Usage: General Plastics, Engineering Plastics, Specialty Plastics, Injection
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Film Pressure
• Color: Natural
• Type: Virgin/Recycled
• Grade: Film
• Application: Plastic Bag, Garbage Bag
• Payment Term: T/T, L/C
• Delivery: with 2 Weeks
• Transport Package: 25kg/PP Bag
• Origin: China

Product Description

PE information:

1.Production description
Packaging & Delivery
Packaging Detail: 25KG PP BAG, OR 1050 BULK BAG
Delivery Detail: 15 DAYS AFTER RECEIVING YOUR DEPOSIT
Specifications
Chemical Name: High density polyethylene(HDPE)
Formula: [CH2CH2]n
CAS No. 9002-88-4
Appearance: Transparent granules
Hdpe resin, hdpe granules, virgin hdpe resin pipe, hdpe. Plastic Raw Material HDPE resin for HDPE Pipes

2. Specifications
Flame resistance material for HDPE pipes
This is the raw material for producing pipe
Grade: PE100/PE 80
Anti-flame,

High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.

3. Application:

Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating

4. Storage:

Shelf life: It should avoid damp, contaminated and direct sun light during transport. And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together, and away from the fire.

Specification	Film grade
Application	Blown and cast film, shrink film, food packaging and plastic bags,  frozen membrane, composite film, heat sealing layer
Notes	Flow varies, different additives can be used to accommodate a variety of processing and manufacturing, and user needs

 

Performance			Test conditions [state]	Test method	Test data	Data unit
Basic properties	Density		23ºC	ISO 1183	0.925	g/cm3
	Melt flow rate		190ºC/2.16kg	ISO 1133	1.9	g/10min
Mechanical properties	Elongation	lengthways		ISO 527	250	%
		crosswise		ISO 527	600	%
	Tensile strength	lengthways		ISO 527	26	MPa
		crosswise		ISO 527	18	MPa
	Tensile strength			ISO 527	11	MPa
	Flexural modulus			ISO 527	260	MPa
	Shore hardness			ISO 866	48
	Fall out of strength			ASTM D-1709	110	g
Thermal properties	Vicat softening point		A/50	ISO 306	94	ºC
	Melting point			ISO 3146	111	ºC