Specification:
PP white Injection
MFI :about 6
Density:0.92-0.95
Hardness: 70-80
elongation at break: 200
Application:used for All kinds of small plastic products, such as plastic drum, cups, toys and so on
PP white extrusion:
MFI: about 2
Density: 0.92-0.95
Hardness: 60-70
elongation at break: 500-650
tensile strength:about 20
Application:used for Extrusion tube, film, etc
Specification:
Properties |
Test conditions |
Typical Value |
Unit |
MFR |
|
8.0±2.5 |
g/10min |
Haze |
|
≤2.0 |
% |
Gloss |
|
≥86 |
% |
Tensile strength at yield |
|
≥25.0 |
MPa |
Flexural modulus |
|
≥0.82 |
GPa |
Izod impact strength |
23°C |
≥17.6 |
J/m |
Ash |
|
≤0.03 |
% |
Cleanliness |
|
6-10 |
|
Fish Eye |
0.4mm |
11-20 |
pcs / 1520cm2 |